Recent content by gberger

That did the trick,have a star!

We are in the process to migrate an IP Office to a new solution Is there a way to export all users button in a .txt file I tried export-users but the buttons doesn't show Thank you

I view them using a usb cable connected inside the Bcm. I was finally able to revive the bcm50 using a Bcm50/450 multi-image drive and installing R6 release. It would not work with a Release 6 image drive so i guess something was corrupted on the hardware that got fixed by the multi-image drive.

I have a Bcm50R6 that doesn't boot up after a power surge. First time i got this issue with a Bcm. I get these messages; mgetty FATAL: yV0 cannot get terminal line dev=ttyV0, exiting modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.22-ncgl-11.45. 1.0/modules.dep (No such file...

The R3 disk image did the trick! Thank you for the suggestion Firebird Scrambler

Firebird Scrambler, i will try an R3 image like you suggest CurlyCord, it was a working system that failed after 12 years...! exsmogger, good idea to try with an R2 hard drive if R3 fails as well just to see if it boots with R2 or if the Bcm50 is really dead. Thanks for your help guys, i'll...

Trying to replace a defective hard drive and getting this error for the first time..I guess the Bcm50 has hardware error or is fried. I am using the same image of Bcm50/450 replacement drive and always succeed but this one is giving me a hard time. Maybe someone encountered this error before and...

Happy New Year to you too! Thanks for helping many users with our good old Bcm's!

Thank you Firebird i will recheck my router settings.

Can someone confirm if it's port 60001 that should be forwarded in order to use BcmMonitor remotely. I cannot connect using it.

My bad...after re-checking all my configuration i saw what i missed the first time "Support Remote Worker" was unchecked. I was sure i checked that but it was not the case apparently. Thanks for your help everyone.

Thank you Curlycord and Firebird Scrambler, The published IP is the right one under IPsubsystem/Public Network/provisionned Public Adress The Nat Traversal license is active. This new Bcm50 is in my lab and the I2050 used to work before on a previous Bcm50. What i find strange is that when i am...

As i recall the "No Ports Left" message was indicating that there was not enough IP Licenses in a system but in this case i have 32 IP client seat and the NAT Traversal license installed for this remote I2050 softphone. I attached the ports i forwarded in my router. Any clues someone...

Great tip Curlycord,have a star!

[lol]