Recent content by masinc1

I moved a 5.0.7 server and an HP Laserjet printer with an embedded jet direct to a new physical location with new IP addresses. This printer was setup and working for Unix at the previous location. Thinking all that needs to be done is to vi the files to correct the tcp/ip info. What files? Or...

Pinging between server & workstations - either direction works fine. I have queried the software company. Because the accounting software operates instantaneously on the server they find no problem with their product. No updates or patches. The server has 2 NICs on the motherboard, numbered 5 &...

Cabled one workstation to the server using a new Dlink switch - bypassing all internal cabling and the main switch. Still experienced hangs. Replaced the network card in the workstation - cabling direct to server w/new switch - still experienced hangs. Will work on your other suggestions. Thanks

Thnaks for the response. I disconnected the IDE cable to the CD. The atapi error has not returned.but the workstations still hang intermittently. The server does not return any error messages for those hangs. Intel motherboard w/2 Western Digital hard drives, SATA, Raid Array.

XP Pro Workstations connecting to 2003 server. Server has event 9 atapi time-out error on IDEport0. Error occurs when one or more workstations are using the accounting software located on the server. The same operation performed on the server is fast and flawless. Once the atapi error presents...

Telnet returns: telnet: socket: protocol not supported. ...much thanks for your time with this.

Well some success!!! Followed your instructions. SCO now pings printer but does not print to printer. Turned printer off/on; verified configuration page; returned to /usr/lib/hpnp/hpnpcfg and used the test print option - Test returned: Printer test failed. Add scosysv.<NETWORKNAME>.com to...

I removed the Marvell Yukon card and now the Intel NIC does not have varying MAC addresses. I loaded the latest Intel PRO 1000 driver from SCO web site. I am using lpn, not lpr - if I am correct lpn is for printers on a network node and lpr for printers on another computer. The printer is HP...

Thanks - I will use your suggestions and report back.

#hwconfig -h device address vec dma comment ====== ======= === === ======= Kernel - - - rel=3.2v5.0.7 kid=2003-02-18 cpu - - - unit=1 family=15 cpuid - - - unit=1 vend=GenuineIntel tfms=1:15:4:10 (0) fpu - 13 -...

I only need one NIC. I had never heard of the Marvell Yukon either. I installed it first because it was on the SCO certified hardware list and had SCO drivers; the Intel card was not on the SCO hardware list, although there were two similiar. Currently, I am not at the system site, but will...

We are pinging by both IP and name. Being resolved through the etc/hosts file and that is working for the workstations, but not the printer - 5.0.7 can ping the workstations. I believe all the subnet masks are the same, but I will double check. I had to bring the system down and will not get...

They are on the same subnet.

I have a fresh install of 5.0.7 - previously on 5.0.5. We upgraded our server to an dual Xeon processor with 2 gigabyte network cards on the board - an Intel and a Marvell Yukon. I have one HP 2300 laser printer w/Jetdirect plugged directly into the router - it is not attached to a...

Additional info: Before upgrade I replaced the Adaptec 2940U with a 39160. I loaded the ad160 drivers per SCO/Adaptec instructions, then did the upgrade.