Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by masviss

  1. masviss

    STA-UW7; - UnixWare 7 HiPath 4000 Version 3

    There is no way to set the Customer's IP address using the Comvin. "This command STA-UW7, which acts as a Telnet client. After the start a Telnet connection is established via the Atlantic LAN to the IP address and the TCP Port which are entered (parameters IPADDR and PORT). The IP address of...
  2. masviss

    OPENSCAPE BUSINESS S Simultaneous call

    I don't have any practical information on extreme tuning. Look at the address https://wiki.unify.com/wiki/Collaboration_with_VoIP_Providers Hints for all Providers Concurrent calls via ITSP (depending on the available bandwidth and used Codec). 30 for OpenScape Business X1 up to 120 for...
  3. masviss

    trunk seizure without prefix

    Remove some parameters in COP CHA-COP:COPDEL,8,EOD&SFRM&BR64&TDED; Make a trial dial of the number. To return the deleted parameters, do CHA-COP:COPADD,8,EOD&SFRM&BR64&TDED;
  4. masviss

    trunk seizure without prefix

    Please show reg-cop:8;
  5. masviss

    System error

    It happens that after some time, 2-8 hours, information from a defective HD disk can be read. These are temperature defects. So do what SBCSU asked you to do. DIS-DDSM; and display the results here - thanks. ! But the HD disk is faulty anyway! What you can do can be determined experimentally.
  6. masviss

    System error

    It seems to me that this is the Hicom 300H V3.0.6 software version (P30252-N4106-B000-00). Take a high-resolution photo of all the system shelf modules for a complete understanding and photo of the processor board. You will have big problems by yourself-recovery of a disk that has a SCSI-1...
  7. masviss

    Hotfix for OS 4000 V10 R0 28

    This is a package of hotfixes files V10.0.28. https://dropmefiles.com/r5gnL
  8. masviss

    Hotfix for OS 4000 V10 R0 28

    A large amount of information. I'll send it through the drop zone.
  9. masviss

    x8 E&M setting

    Choose your option
  10. masviss

    Openstae 40 SIP cyrillic

    For basic SW versions 6.2.15 and older. You need to use the instructions.
  11. masviss

    HiPath 500 and BS4 connection

    It seems to me that you need to replace CMS with CMA. This is a recommendation from the documentation. And show us the pictures Settings - Cordless - System-wide and so on.
  12. masviss

    Configuring ROLMPHONE 400 on Hicom 300 E

    Please show reg-sbcsu:XXXX; new manager number. reg-sbcsu:YYYY; old manager number.
  13. masviss

    the configuration osbiz is not save on

    Try to save the database to the SD card via Assistant T, if I remember correctly, menu item 28-2-1. You will see the function value on the phone display.
  14. masviss

    HICOM 300H

    https://www.123.com
  15. masviss

    Hipath3800 Audiocode

    Probably, yes. Try to do it and see.

Part and Inventory Search

Back
Top