Recent content by Midstream

Do you call the Console directly, or dial "0" as a vdn? If so, do you have 0 set up in the public numbering plan?

What extension is the Console? Do you have an entry in your public numbering table for this extension?

http://downloads.avaya.com/css/P8/documents/003880178 page 123

They may not like it that you're installing them while the server's hot. Have you tried installing both power supplies in one of the servers while it's off, then powering it up? Here's the Maintenance Manual for the S8800: http://198.152.212.23/css/P8/documents/100068161

Let's say you've just been told there was a split registration event, but now it's over and all is well. Then someone else asks "What caused it, which gateways were affected and how long did it last?" Where do you look? What logs are available to help find the answers?

Is your main number a VDN? Do you have that in the public numbering table? Something's missing from public or private numbering. Looks like you may be using unk-prvt on the trunk group. Have you double checked both forms?

Put an entry in your public numbering table for 0.

My guess would be it's most likely something to do with your public numbering plan. Start from the beginning... What has the Originating Caller dialed? How did they end up speaking with the Operator? What does the Operator dial to get the call to the AC gateway?

They've revamped support.avaya.com! Goto this site:http://support.avaya.com/downloads/download-details.action?contentId=C20106214076560_1&productId=P0433 It's the 6.0 GA load for ASA. That will take you to PLDS, you're going to need a valid login. And you can get the SP back at the support...

Is it the full-blown UPAM, or that little System 25 doo-hickey?

Mine turned out to be JUNK, right outta the box! It was refurbed, supposedly tested, but it was junk.

I'm about to swap out a G450 where I had a G650. I'm concerned about the Paging Loudspeaker port which is connected to a TN763 AUX Trunk card. Am I going to need a UPAM between an analog port and the paging amp in order to support this going forward, please? Thanks, Phil

The command to show/administer the LDN number display listed change listed

Try SimpliCTI. I've worked with them on CCE projects. They're great developers. http://www.simplicti.com/web3/

We tried CCE 3 on Windows 7 64-bit, no joy. Upgraded to CCE 5 and we've got a new working client.