Recent content by sampko

We have setup load blanancing on an NSA 240. When enabling this, everything work great on all computers connected, except for one server that is not able to ping outside or browse the internet. I have checked routing, and I don't see any custom routes. Any idea's why all but one computer is...

ok so here is what I did router1 eth2 is 192.168.0.2 router2 eth1 is 192.168.0.4 eth2 is 10.10.0.1 From the start, I can ping eth1 from router1 and vise versa with router2. I can not however ping 10.10.0.1 from router1. I created the following static route on router1: ip router...

Ok so I already have a port on both routers on the same 192.168.0.0 network. PC's attached to router2 can already use the internet. So then judging by this, I should just setup a routing protocol and I should be good to go?

I have two 1700's. First router1 has 2 ports 1st Ethernet connected to cable modem. 2nd Ethernet connected to switch1. (192.168.0.1) Second router2 has 2 ports first Ethernet port connected to same switch1 as first router. (192.168.0.4) second Ethernet port connected to another switch2 with...

I created a new domain called local.domain.com. Created a upn called "domain". I can log on to the dc with domain\administrator ok. Created a new user: user1 and try loggin on as domain\user1 but get an error that user/password is incorrect. I am howerver able to use user1@domain. Is there...

I have a cisco 1700 that I had setup with my previous cable modem and worked great. Got a new modem when the old one crapped out. New modem is U10C019 (http://www.ubeeinteractive.com/user-guides/U10C019-U10C020_End_UserGuide_1.6-2009-02-20.pdf) and I am not sure how to set this up. The only...

We have a hunt group 450, when users call in and hit 3 on menu tree, it rings to. The group time out is set to 9999 so that way unless someone really wants to wait, they will not get forwarded to voicemail(Not my Idea). Trying to find out how many calls coming in are not answered. Tried...

well in my case it is a perc 5

I have a 4 hard drives, 2(36gb) as raid 1 and the other 2(500gb) as raid 0. Now I want to add another hard drive(1tb) and it is full of data that I need to keep and want to be made available to the server. Is it possible to put the drive in and not have it wiped?

Blah I give up.. Just setup the win2008 server to issue dhcp ip's and everything works ok. I just need to get a regular switch instead of the netgear. Thanks for the help though

That's what I was thinking previously, but could not get to work. I already only had the lan ports hooked up. I even dissabled spi on the netgear. Here is the Static Route I setup on the netgear: Route name: Test Private Checkbox: Checked (tried both checked and unchecked). Destination IP...

ok then you will have to either disable the default, or change the listening port on the default site. Then you will be able to set the new separate website to port 80.

mainly because when the netgear was setup as the router, I had to power cycle it sometimes 2-3 times a week in order for it to work. Now I mainly have it setup to use for switching purposes. Any way to disable the firewall settings, or forward them on to the cisco?

are you creating a separate web site, or are you using default website?

Depending on your comcast device, I have seen it where you can not route traffic between ports, pc on port1 can not see pc on port2. The ports are setup to just route traffic directly out to the internet instead of to another port. I say comcast device, because with out the model, there is no...