Search results for query: *

No sure if anyone has played around with heartbeat but... I was able to get heartbeat working over same subnet, but is there a solution to get it working with each node on a separate network?. layout.. have vip as 192.168.1.1.. apache server 1 192.168.1.2 apache server 2 172.16..0.1

I have been banging my head against a wall on this one.. I setup a ssl vpn asa 6.4 and my remote user connects via cisco anywhere client, but when it connected the user loses internet and cannot ping anything not even on remote side. I did research and i tried nat acl , but i just can figure...

Guys , I have a few users that when i plug their machines spanning tree (or i think its spanning tree) is putting the port in blocking state. when i turn on portfast it obviously works. I ran a debug all on the port and below is what i get . I have no idea why this is happening. its just a pc...

I created a new user ( config below) that i want only priv level to be active on ssh login But when i ssh into box the user has 15 or 1. When i remove pri 15 in vty 0 15 then admin is asked for en password. how to i make it so when admin logs in it has 15 and when user jes logs in get 5...

current setup 100mbps data line ip nw 1.1.1.1/27 ( for argument sake) very simple cisco 1800 provided by ISP Scenario: i'm getting a another 100mbps line for fail-over/ HA . the ISP is giving me 2.2.2.2/30 & 3.3.3.3/29 Problem/Question: If i do this i will have to get two cisco 2900's...

Guys, I'm looking to buy two ISR cisco router as my gateway to my ISP. I have a fiber 100mbps service. Basically the ISP is going to supply the pipe and I'm going to setup the router. I say router for redundancy , I'm going to setup HSRP . I was looking at the 2911 because the pps is more then...

Guys, I have 9 L2 2960x flexstack and one L3 3560. I'M curious how i would design this network with as much redundancy as i can ? Lest say i have 8 Vlans ,I figure setting 2/3 ports ether-channel/vlan trunk from L3 to first L2 switch in stack. Then for redundancy god for bid any one of my...

Guys, Please let me know if i'm understanding this correctly because allot of the documentation I read is a bit confusing. Recently I needed a new switch (netgear) and i notice a ton of multicast packets on certain ports being reported on this L2 switch. So i figured the applications on the...

router eth0/0 192.168.1.1 eth0/1 192.168.2.1 default gateway 192.168.1.23 i have a user with ip 192.168.2.212 which i need to be nated to 192.168.1.45, how can I do this? i read up on some things but i don't want to break anything as this is a production router. i need ip...

I have two sub nets on my cisco 2600 (ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1) 192.168.1.0/24 eth0 & 192.1682.0/24 eth1 I have an smnp server on the .1 nw and anything on that nw i receive traps but nothing on the .2 nw. Why is the router not passing through the snmp...

question. I have a machine ip 192.168.1.23 and the default gateway is pointing to my cisco 2600 at ip 192.168.1.1 The cisco 2600 ip last resort is 192.168.1.20 so as you all know all traffic will be sent to 192.168.1.20. My question is i need 192.168.1.23 to send all its traffic to...

Guys, I'm sure this was posted somewhere else. But I haven't found an answer on my problem. I have two different sub nets which are needed, 192.168.1.0/24 192.168.2.0/24 separated by a cisco 2600. I can ping just find and use all my apps between subnets. My problem is when I view my network...

Guys, I'm sure this was posted somewhere else. But I haven't found an answer on my problem. I have two different sub nets 192.168.1.0/24 192.168.2.0/24 separated by a cisco 2600. I can ping just find and use all my apps . My problem is when I view my network neighbor hood from the...

Hey All I have a problem with a user other then root. I'm trying to set ulimit -n 20000 in my .bashrc or even my .bash_profile for that user but everytime i log off it tells me I don't have permission. How can I have this save on boot?... -bash: ulimit: open files: cannot modify limit...

i have a problem. i have a cisco 2600 fasteth0 172.17.1.10 fasteth1 172.17.2.0 the last resort gateway points to my firewall ( trusted 172.17.1.1) my problem is everytime my firewall crashes my users on my 172.17.2.0/24 network cannot see anyone on the 172.17.1.0/24 network. the firewall...

Can someone help create a nat rule.. I have two interfaces on my 2600 fasteth0/1 192.168.2.2 fasteth0/0 192.168.1.10 I want all traffic comming from 192.168.2.2 interface to look like it's from fasteth0/0 192.168.1.10... the default gateway resort is 192.168.1.1. thank you

All my folder have the readonly flag and I cant get rid of this. I try everthing. I went to MS KB Article id 256614 and still nothing. I even tried using the attrib command. Any help would be great.thanks guys

I'm trying to setup igrp or even rip and i keep getting error opening socket.when i sh ip protocol. i get nothing.Anyone have any ideas.?? here's my sh run and sh ver VAX#sh run Building configuration... Current configuration : 417 bytes ! version 12.2 service timestamps debug uptime service...

Can someone please explain what tagged and untagged ports are used for ..Correct me if i'm wrong but you can have more then one port on a vlan for perposes for vlan trunking? I also understand that if a untagged packet comes into a port on a vlan, then the packet gets a tagged according to the...

I have a major problem. I had a nortel switch that went bad we replaced it with a cisco 3560 and snice then i'm having problems with infrequent packets being drop. I set it up the same way i had the nortel (vlans)and full duplex. When i ping the gateway device from the cisco switch i get packet...