Search results for query: *

Besides SSH Explorer. I know Baracuda took over that software from Open Source and there is a similar fork. But I was wondering if anyone has a good VPN SSL OpenSource solution. Alos, I realize there are MANY commercial solutions, not looking in that space.

I have one SPA504G that I cannot do a factory reset (via phone menu) due to not having the Admin password. I have searched on Google and other sites and there is the hack of trying to "provision" the phone via TFTP and either a password XML file or the Default config.xml - I tried this and...

RHEL 6 with GNOME. Can the cnnection be automatically encrypted using TLS or other method ? This is niternal traffic and would be used to prevent sniffers for passwords and the like. The client desktops could be Windows Mac or linux.

I have 2 Zyxel gs-1100-24 with 2 gbic ports. When I hook the gbic up along with the transceivers they light up appear to work and then shortly thereafter turn off. Is that a power save feature of the 802.113az ? If I disconnect the transceiver it does not light backup and start working. I...

I have an extension under inbound DID. It routes to extension as such: [ext-did-0002] include => ext-did-0002-custom exten => fax,1,Goto(ext-fax,in_fax,1) exten => 2155551212,1,Set(__FROM_DID=${EXTEN}) exten => 2155551212,n,Gosub(app-blacklist-check,s,1) exten => 2155551212,n,ExecIf($[...

I have a Merlin Legend and a Partner ACS. Hooked the extension on the partner to the 800 GL-ID - Port 11. (config from WinSPM below): Slot # 0: CKE4 CPU Slot # 1: 800 GL-ID Slot # 2: 408 GLM-U Slot # 3: 408 GLM-U Slot...

I think this is a relatively new entry into the PBX market by MS. Just curious of anyone has opinions on this use and any success/horror stories.

When DB2 tracks the logs/archinve logs it writes to TWO BSDS datasets to keep critial startup information available. With the advances in DASD these days, are two copies still needed (in your opinion). Is is even possible to turn off the 2nd BSDS ? In the old days the reason IBM did this was...

I have a campus within 1000' where a partner acs 5.0 and legend 7.0 are in use. The people on the partner system sometimes get calls for the legend users. When this happens that either give out the phone# or manually transfer them. If we defined the Legend as an extension on the partner and...

I setup a new extension on an 012 board. It is a standard non-MLX phone. It works fine. I then setup a mailbox with COS of 2 (this is a MLM007 VM system). It rings and rings with no answer. Does there have to actually be a PHONE on the line ? This phone gets unplugged during the day and...

Has anyone seen this before? You call the main number, the auto attendant answers and you pick an extension. You get to the voicemail, it rings once. You hang up. The operator extension then rings once. This is able to be recreated at will. (the error here being that the operator extension...

Hi folks, I have a Legend 7.0 in carrier 1 with 32 extensions and the following in carrier 2: Slot 07 012 board - 517J13 12 ports HW 04 FW 34 Slot 08 012 board - 517J13 12 ports HW 02 FW 51 The slot 08 is actually the Voicemail MLM007 unit. Why does that show up as a 012 board? Slot 7 is...

Is is possible to configure a specific telco line that when called would forward to a specific extenstion ? Right now we have four telco lines one main number that everyone calls and 3 roll over lines. Can the three rollovers still participate in rollover and be used for direct inward dialing...

I see that the 617F29 module is for the Magix. But can it be used in the Legend too? An online company that sells these says yes. Are there any issues with mixing and matching the 617F29 and 517C29 408 cards ? I figure someone here has probably tested this before. They appear the same, only...

Is there a rule of thumb for how many outside lines can support N number of extensions ? Or is that simply an art ? I have a few direct lines I'd like to add as extensions but do not want to cause any issues with call volumes, etc. My existing config is a Legend 7.0 with 8 outside lines and 32...

I have winspm 9.0 installed. connected a hyper terminal to the SMDR port. How do I print the entire system programming report ?? The PRT OPTS does not allow any printing. I looked at avery MENU option and see no PRINT abilty. I did get a call log print as soon as I connected to the SMDR so...

Hi folks, here is the configuration from the programming phone: Slot 00 Vintage 00 Legend 3.1 V2.0 Slot 01 800 GS/LS Vintage 03 FW 13 Slot 02 408 GS/LS-MLX Vintage 04 FW 28 Slot 03 408 GS/LS Vintage 04 FW 28 Slot 04 008 MLX HW 05 FW 08 Slot 05 008 MLX HW 05 FW 28 Slot 06 008 MLX HW 05 FW...

Hi folks, I am interested in th best practices for this setup. One windows domain sevrer that does filesharing and DNS/DHCP for a LAN. It handles all the authentication as well as some network applications. There are perhaps 200 computers attached. Some network printers and wireless routers...

Hi all, I am new to fiber cabling. I have some basic questions. Been reading about multimode 50/125 plenum cables. The 10G cost more then non-10G. Can I use the 10G on 1G speed ? (without any special attenuators, etc.). My thought was to cable two buildings using the 10G 50/125 and...

I have system with SLOT 00 of Vintage 00 and 3.1 V2.0 from the maint. display. Does this support caller id ? SLOT 01 has the 800GS/LS hw:03 and FW:13 (which I think support 8 co lines and has callerid). SLOT 03 has 408 GS/LS with hw: 04 anf fw: 28 (4 co lines does not support caller id).