Search results for query: *

We are in the process to migrate an IP Office to a new solution Is there a way to export all users button in a .txt file I tried export-users but the buttons doesn't show Thank you

I have a Bcm50R6 that doesn't boot up after a power surge. First time i got this issue with a Bcm. I get these messages; mgetty FATAL: yV0 cannot get terminal line dev=ttyV0, exiting modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.22-ncgl-11.45. 1.0/modules.dep (No such file...

Trying to replace a defective hard drive and getting this error for the first time..I guess the Bcm50 has hardware error or is fried. I am using the same image of Bcm50/450 replacement drive and always succeed but this one is giving me a hard time. Maybe someone encountered this error before and...

Can someone confirm if it's port 60001 that should be forwarded in order to use BcmMonitor remotely. I cannot connect using it.

As i recall the "No Ports Left" message was indicating that there was not enough IP Licenses in a system but in this case i have 32 IP client seat and the NAT Traversal license installed for this remote I2050 softphone. I attached the ports i forwarded in my router. Any clues someone...

thread1361-1775759 I tried to install Internet Explorer 6 on Windows 7 but it cannot install on a 64 bits OS ad i am wondering if anyone was able to make Activity Reporter works on Windows 7. In the other thread i see that you can disable the web check but you need to be in IE6 for this. Any...

We are in a process to replace an IP Office that has third party SIP extensions with a Cloud base system and was wondering if it's possible to retrieve the user's SIP password? I have a backup of the IP Office but in the password field it shows only dots and it doesnt allowed to copy that field.

I need to upgrade a Bcm450R1 to R6 but can't find my Bcm450R6 upgrade folder. Can someone share it with me please?

I'm trying to setup a remote worker phone (1140e). It register fine but there is no audio on both ways unless i put my Bcm50 in DMZ on my Asus router then the audio works fine both ways. Of course i don't want to leave the Bcm50 exposed on the net so wondering which ports need to be opened.

Would someone know the linux command to delete all the cdr records? I do have access to Linux using putty and nnsupport account. Backing up these Bcm's takes longer and longer since we can't uncheck the call detail recording when doing a backup... Thanks

Avaya/Nortel official document state that you can connect up to 300 Digital sets but the maximum number of DSM32+ i can configure is 7 for a total of 224 digitals. No matter if i put a DSM32+ or a PRI module in expansion 1-5 or 1-6, when i configure them it does not give me dip switch...

We might upgrade an IPO 6.0 to 9.1 and i would like to know if that combo card is supported on 9.1 Part number is: 700476013 and DLC8 is: 700417330 Thanks

We just had an IPO 9.1 installed temporarely, the .cfg file came from an 9.0 and loaded in the 9.1 All Nortel sets connected to the DS30A shows date and extension but 3 newly installed sets are showing "?" in the middle of the screen. The phones work fine but even if its a temporary installation...

Anybody else had this problem trying to upgrade a UC Module from version 8.1 to R9? First i uploaded the R9 upgrade zip file then went to "Updates" and tried to "update all". After few minutes it comes back and nothing is updated,i have to upgrade them one by one. The only one that doesnt...

I can't find a way to have my PRI to show PRI24 under Lines instead of PRI30. Codec was showing A-Law in Telephony, i changed it to U-Law so maybe that's why the PRI is showing 30. I changed Locale from UK to Canada with no effect. Can i delete the PRI line, then reboot maybe it will then show...

Is there a special setting in the 9620L that would send "Private number" on SIP trunks. All the other sets(1616,1608) send the proper caller ID over SIP, populated in the SIP tab but the 9620L shows "private number" even if "anonymous" is not checked in the SIP tab. I compared both sets...

I recently installed an IPO R8 with SIP trunks using a Public static IP adress on LAN2. Could not make it to work thru the customer firewall. Is the embedded firewall using Internet01 firewall profile suffisant and secure enough? Any settings i could add to that profile to be more secured? Thanks.

I need to create 50 mailboxes for sales rep on the road that do not have physical phones,do i need to create virtual extensions(IP)to avoid the error log stating that the extension doesn't exist? Thanks,

Has anyone encounter intermittent no audio on a Bcm450 in a full IP deployment? You lift the handset and there's no dialtone.No need to reboot the IP phone it comes back by itself.Can happen on any phone anytime,really random. I suspected the network but those two customers have two different...

I'm wondering if someone has gone thru this problem with the latest release of 1120E. It seems that the firmware is for CS1000 or maybe SIP firmware. When the phone boots up instead of asking for the color*set, it ask for a userid and password.None of the usual config are the same(there's no...