Search results for query: *

CM 7.0, SMGR 7.0, SessMgr 7.0. Two SIP test sets - one J179, one 9611G. Both have the latest SIP firmware for their model. I finally managed to get each set registered to the Session Manager. I can call each from my H323 set on my desk. On either SIP set, if I go off-hook and dial an internal...

Good day everyone. I am trying to connect an Avaya G3si v9.5 to a stand-alone FreePBX box, which will be used for voicemail only. I have a PRI T1 in place which mostly works - calls go to the correct mailbox, and messages are left. However I can't get MWI to work at all. I have tried a number of...

Hey all, I have a Connected Systems PBXLink connected between an Avaya G3siV9.5 and an Asterisk/FreePBX box being used exclusively for voicemail. I have ISDN/PRI connectivity between the Avaya and the Asterisk; Calls cover to voicemail with no issue. I have FreePBX setup to use SMDI to provide...

FreePBX 15.0.16.42 Asterisk 16.6.2 Getting the error: ERROR[2457] app_voicemail.c: No valid SMDI interface specified, disabling SMDI voicemail notification Voicemail.conf contains the following lines: [general] smdiport=/dev/ttyS0 smdienable=yes externnotify=SMDI smdi.conf contains the...

Asterisk 13.22.0 FreePBX 14.0.13.26 Avaya Definity v9.5si, IP enabled (but not SIP capable) I am an old Avaya guy, and a newbie to Asterisk and Perl scripting. And I apologize profusely for the length of this post. I am trying to set up FreePBX as a standalone voicemail server for an Avaya...

Hello, I had a need today to terminate an active conference running on Avaya Aura Conferencing (AAC) 8.0. I have no idea how to do so. I was watching the conference on Element Manager using the KPI / Monitoring and reporting. Short of deleting the user through the admin interface, I'm unsure if...

Avaya CM 7.0 / System Manager/Session Manager 7.0 Running 46xx/96xx/96x1 IP sets, all H323. Looking for a "quick setup guide" to add a SIP phone.I found lots of help on SIP trunking (which I'll need later, but we're not there yet), but nothing on adding a SIP station to an H323 environment...

Good day all, We are migrating a site from a G3R EPN SCC to a G430. Got everything done except the paging. The EPN used an Aux port connected to a 909 Universal Coupler, which was in turn connected to an Avaya-branded 250 watt amp (sure looks like a Bogen 250). Dial the paging code, hear three...

CM 7, 9608G telephone sets in the field, 9641 with one expansion module at my desk. Using a system where the clerks in facilities around the city can press a button on their phone to engage an "emergency" agent. The vector checks for this agent at the beginning of the call flow, and if it is...

Just picked up a used Stratagy Voicebrick. Found docs on-line, but need the software to reprogram. I found several old posts here, where people were able to provide a copy, but they were all at least 10+ years old. So if you have the software and are willing to share a copy, please let me know...

A school I support has a Nortel CICS with a Call Pilot 100. The CICS is being replaced with a Definity G3v8 and all digital sets. I am trying to find out if the Call Pilot can be used with the Definity directly. I would prefer a Definity Audix, but have a limited budget. The Audix units seem to...

Here's one for the old timers.... Modular Messaging 5.2, need a report of any mailboxes with a "Secondary Extension" defined. Any easy way to collect that data? Thanks in advance - - Duaneness

I recently moved to a new position and now am supporting literally thousands of 9608 sets. For the last three years I had been supporting a Cisco envirnment with 7260s and 7261s (before that, 12 years supporting Avaya). The Cisco phones have a built-in web interface, allowing me to see and...

We are decommissioning an Octel 250 and returning it to the corporate warehouse. We are required to remove all translations before shipping it. I have removed all user mailboxes, but was wondering if there is an easy way to completely remove any and all translations that may be in the system...

Decommissioning an Octel 250 running Aria 03.11.05-1. I know how to shut it down (Menu 13.1 - Shut Down with Dump). The question is approximately how long will it take to shut down? There are zero user mailboxes on the system and a backup will be performed prior to the shutdown. Thanks in...

CM 4.0.1 on S8720 servers VAL Manager 4.0.11 Windows XP SP2 I've been trying to get VAL Manager to work. I finally got it to connect and see my lone VAL board. When I back up the files, they are all in the 2KB - 3KB size, and will not play in Windows Media Player. When I back up the files...

Is there any way to see what alarm condition was cleared? We're running CM 1.2. When I go into the web interface of the server, then select "View System Logs" under Diagnostics, and select Platform command history log, I can see where alarms were cleared through the inads port. but I can't...

Good day all - I am looking for a chart, table or an explanation to convert my "software load" into a version number. In my "display capacity" pages, it shows: Software Load: R011x.02.0.111.0 I thought I read somewhere that the last digit of the "R" number translates to the...

Octel 250 / Aria 3.11.05-1 Four FLT cards (044-2540-001). On three of them, the PWR light is green. On one (the one closest to the CCF card) the PWR light is amber. Should I be worried? Can anyone explain the difference? Thanks in advance - - Duaneness

Octel 250 / Aria 3.11.05-1, Avaya CM1 (S8700) Department of 8 people have a hotline, all of their phones ring with a call. Occasionally, no one is present to answer the call, and the caller leaves a message in the Hotline mailbox. I have aut-msg-wt buttons on each of the department phones...