Search results for query: *

Hi All, I'm an old phoneman but I'm new to Tadiran. I have a 281S phone on Coral IPX. This phone doesn't have a voice mail. What are the options to be able to answer a second call. Right now when a second call comes in there is a waiting indicator. Should I add a second line? Thanks

Hi, > I have two Avaya PBXs (8500 6.0 and 8300 4.0)connected with a QSIG/PRI > trunk and I have a problem with how call information is displayed. > 8500 is peer-master and 8300 is peer-slave. > > When I call from 8500 to 8300 only the name of the phone is diplayed, no > extension. When I call...

Hi, I have a lab deployment of lync2010 enterprise with dual FE and dual edge servers. I'm having intermittent problems with external clients making calls to internal clients. The address book is working and I'm able to call internal to external or external to internal. The call rings in and...

Hi, I have to setup what seems to be a very basic configuration, but it doesn't work. In our lab there is a cluster of switches with a 3550 that does all the routing for vlans. I need to simulate a sort of a small branch office that has one connection to the outside world (the lab...

Hi, I have this problem with a small NBX V3000 R6.0.14 system. On outgoing or incoming trunk calls I have no voice path. On the incoming call I get an autoatt, dial ext, get transfered to that extension, I see a caller ID on my 3com phone, but no voice path to the outside caller. Same thing on...

Hi, I'm trying to activate SMDR on a Mitel 5000. I'm in System/Maintenance/SMDR I've changed SMDR Output to YES, Above it, Output Port is set to NONE. What should I change it to? I'm not sure what kind of information goes there and in what format. Thanks

I added two new i2001 phones to the Meridian 11C CALL SERVER/MAIN CAB VERSION 2121 RELEASE 4 ISSUE 00 T Both phones work and I can make calls, but the hold button doesn't work on either of these phones. I make my test calls with I2004 phone. When I press a hold button on i2001 the voice...

Hi All, I have a BCM 400 in our PBX test lab and I lost all IP connectivity to it. Digital phones are working fine. I can connect to a system with a HyperTerminal. Here is what I see. The disk structure is corrupt and non-readable...

Hi, I have this problem that just started a couple of days ago. I have a small S8300 3.1 with SES 3.1 It is in our test lab. I no longer unable to make any sip to sip calls or sip to S8300 or PSTN calls. When a a phone tries to call, wireshark trace shows 407 proxy authentication requiered...

Hi, I have a BCM400 Rel.3.6. It was our company's inhouse PBX. We now have a new system for our office and I have to reinstall the BCM in our interop lab. The system is now up and running, and I have both serial and web access to it.I have to change IP addresses to connect it to my lab network...

Hi All, I'm totally new to BCM, I have one in our interop lab and I'm having a problem with only digital phones operational. The hard drive doesn't run and when I attach the monitor and keyboard I don't see system booting. The indicators show that the HD is not running and serial and LAN ports...

Hi All, I have a 3550 switch which is used mostly for intervlan routing. I am trying to create a port with subinterfaces and I am getting this error. interface FastEthernet0/24 description Desk 4 no switchport no ip address spanning-tree portfast 3550-1(config)#interface fa0/24.10...

Hi all, I have a problem on our Hipath 4000, where the incoming co trunk call can only be answered when a console or a phone is ringing, but not between rings. Any idea why this is happenning? This PBX is used in the lab and that is how it was installed by our vendor. I have many years on...

Hi Folks, I've decided to use Cisco Software only option for our new install and ordered their Rel. 6 software. We have here a brand new HP DL320 G5p server that meets Cisco requirements. Now I am having problem installing it. It looks like that none of the HP Linux drivers work with this HP...

Hi I have a 3.1 SES server that is teamed with an 8300. We are changing IP addressing on our network. I've already changed everything on the 8300 and it is up and running, but I can't figure out how to change the IP address of our 8500B based SES server. THanks

Hi, Is it possible to change alaw to mulaw and back on the 3300 ICP? Our PBX is a lab switch and sometimes I have to do that. I can't find this parameter anywhere. Thanks

Hi, I am trying to add an XM24 module to a 6416 phone on an S8300 Rel 3.1 and it doesn't work. It came with 1151C power supply. I am using a straight thru 8 pin cable from the power supply to the phone, the standard line cord is plugged in the line jack on the power supply and the six conductor...

Hi All, Does anyone have any experience with Avaya MultiVantage Express? I've read about it anything that I could find on Avaya website, which isn't a lot. I can see that it is still at CM3.1, while CM4 is the current release for all other S8xxx systems. Also I don't see any SIP support...

Hi All, I have a question whether IP Dterm on 2400 IPX has any administration functions that are accesible from the phone itself. I can't find any reference on that in system manuals. Thanks

Hi, I am fairly new to IPOffice and I was wondering if it is possible to downgrade the system. My system is used in the Interop testing lab and sometimes we need to test our PBX with older release of software. I was thinking about maintaining two different versions of a Manager on two different...