Search results for query: *

I have a friend with a Toshiba M35X-S329 laptop. The DC socket is problematic and flakes out causing the laptop to run on battery unless you fiddle with the DC connection. He would like to replace the DC socket and I told him I'd help, but I'd like to know how involved the process is and where...

Will this command unmap all of the devices in the box? unmap dev ALL from dir ALL:ALL If you're wondering it's a brand new box but the binfile put all luns visible on all FA's and I don't want that. Also what's the quickest way to put them all in a DG so I can not_ready them? thanks for the...

I have 3 new RAID 5 arrays made up of 10 disk each for a total of about 1.2TB. I was wondering what our limitations are for the amount of logical drives we can use on the DS4800. Do you know the max number of Logical Drives we can create before we start seeing performance degradation? I...

My C drive is a 6GB IDE harddisk. I have two 9GB SCSI disks on the same box, currently drives E and G. I want to format both of them and create one 18GB partition from both of them. Then I want to migrate my C drive (which is almost full, only 420Mb left) to this new partition. My C drive...

Asked the EMC tech yesterday about it in an e-mail and he said he and others have installed using VNC with no issues. Carpe Aptenodytes! (Seize the Penguins!)

look at the manpage for 'symconfigure'. You should also be able to find whitepapers on powerlink.emc.com. Monitor out of pixels, I'll need to go grab a box and fill'r up.

I work from home in Washington State. I have a server in RTP, North Carolina which needs to have ECC installed (a single server install with Storage Scope and Performance View). I have hands and feet that can switch disk for me etc. And was wondering if it is possible to install either ECC...

Hi, I just began supporting a customer remotely. They recently relocated their EMC SAN from Miami to Raleigh and after relocating EMC Control Center is not functional. I'm told that someone needs to re-install it, but they must be local to the server to do so. That is not currently an...

Thanks for the info. The strange thing to me is that 15 out of 50 were affected and they were all ordered and shipped and received at the same time, so I would've thought they either all had the problem or all did not have the problem. Strange....anyway, thanks for the help. Monitor out of...

Hi all, I just did a jumpstart install of Solaris8 on 50 brand new Sunblade 2500's. Most (35 or so) loaded just fine and are now identical to our other workstations, but a few had a strange error. After the jumpstart install was complete and the box was booting for the first time using the...

I think I found the problem (luser didn't tell me) it's on a KVM. The KVM is drawing power and some keys just won't function after a while. I told help desk to hook him up with another keyboard and have him run 2 keyboards. Thanks for the reply. Monitor out of pixels, I'll need to go grab a...

Hi all, I have a user who is reporting problems with his function keys on an IBM 7044-170 running AIX 4.3.3.0 ML11. He says that the function keys do not work after the box has been up a while, but if he reboots they work fine for a while and then become unusable. He is sharing his monitor...

If you're using Veritas DMP you can use vxdmpadm to see your disk path outputs for SAN storage. Is this what you're looking for? Just type vxdmpadm on the command line with no arguments to see how to construct the command with flags and args. Monitor out of pixels, I'll need to go grab a box...

Found the problem. Apparently the NIM image I used to upgrade the box had a NIM master setup on it unbeknownst to me. I took that off and all works fine now. Monitor out of pixels, I'll need to go grab a box and fill'r up.

I haven't used websm, but I have tried it from smitty and gotten the same error. Monitor out of pixels, I'll need to go grab a box and fill'r up.

Sorry, I forgot to add this is on an AIX 4.3.3 ML11 OS. Monitor out of pixels, I'll need to go grab a box and fill'r up.

Have you ever seen the following NIM bug. Remove /etc/niminfo from NIM client workstation gldi001 To recreate niminfo use # niminit -a name=gldi001 -a master=meek -a master_port=1058 I ran that command on the client gldi001 and... ...I get an error: 0042-147 niminit: this command may not be...

I have a Solaris 8 server which recently had a gigabit nic installed (by another and now departed admin) which WAS working just fine. Now when I run "ifconfig -a" I only see the output for bge0 and not for any of the other devices, not even the old 10/100 NIC which (to the best of my knowledge)...

I am 'unmarrying' my Win2k/Fedora Core 2(linux) PC, which I am currently using GRUB as the bootloader. I need to know how to remove Grub from the MBR and how to define the Windows bootloader in the MBR? Is it just as simple as fdisk /MBR? Or is it more complicated? If more complicated please...

Here is my "rmemc.ksh" script I use to remove all EMC devices (we use one DMX3000, one DMX 800, one CX600 and two CX700's as well as a number of Sharks). This script works for all EMC storage. Just remember to VARYOFF your VG's FIRST. Then do this: #!/bin/ksh powermt remove hba=all #...