Change Route Help 1

[mattm31]

We have a dialler connected to our Option 11 using a QSig link.

At the moment if i dial 3999 it connects me to channel 21 or channel 22 (Which every is free) on the QSig link.

I now need to change this to connect to Channel 27.

Is this something quite simple that i can do myself ? and
can someone give me some instructions or do i need to get someone in to do it ?

 

[PERRYPJ]

LD 14
CHANGE THE ROUTE AND MEMBER ON CHANNEL 27 TO MATCH 21 AND 22, THEN IF YOU DON'T WANT 21 AND 22 ANYMORE CHANGE THEM TO SOMETHING ELSE

OLD ROLMEN WORKING ON NORTELS

 

[mattm31]

Thanks for the info.

I've never used LD 14 and chance you could do me a walkthrough please.

Thanks

Matt

 

[PERRYPJ]

GO TO LD 20 AND PRINT THE TN'S OF THE 2 CHANNELS, THE RTMB IS THE ROUTE AND MEMBER

DES PRI2
TN 019 01
TYPE DID
CDEN SD
CUST 0
TRK PRI
PDCA 1
PCML MU
NCOS 0
RTMB 10 24
B-CHANNEL SIGNALING
NITE
STRI/STRO OWK OWK
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD HKD
P10 VNL
TKID
CHANGE THE CHANNEL YOU WANT TO THAT ROUTE AND ASSIGN A DIFFERENT MEMBER, THEN YOU CAN CHANGE THE OTHER 2 CHANNELS TO SOMETHING ELSE IF YOU ONLY WANT THE ONE CHANNEL

OLD ROLMEN WORKING ON NORTELS

 

[mattm31]

OK

I think i get it.

Channel 21
is RTMB 111 1
Channel 22
is RTMB 111 2

so for Channel 27 i need to set
RTMB 111 3.

so this is just a chg in LD 14.

Also Channel 22 is the last one setup
so i need to set the next 5 channels from
scratch.

Can i cpy from an existing one or do i need to
do it for scratch.

 

[PERRYPJ]

FROM SCRATCH

OLD ROLMEN WORKING ON NORTELS

 

[mattm31]

Brilliant thanks Perry all done.