Does anyone have a handy link for phone compatibilty for the BCM50?

[JimHilton]

Hi all, one of our divisions has had a major downsize and they are pulling out a Mitel 3300. I have posed to source a cost effective solution. I have been very interested in the Nortel BCM50 r1 4x8x2 repl 3x8 DR5 Startalk Flash system.

We have a good variety of Nortel sets still around, but I want to be sure they will work with this controller.

If you have a web site or quick guide to point me in the right direction that would be most appreciated.

Thanks!

Jim

 

[biv343]

All the legacy Nortel sets will work on a BCM 50 - M7100, M7208, M7310, M7324 and all the T-series. Some of the old 7100s and old 7310s, pre release 13 models I believe, don't retain the set volume between calls.

 

[biv343]

All the legacy Nortel sets will work on a BCM 50 - M7100, M7208, M7310, M7324 and all the T-series. Some of the old 7100s and old 7310s, pre release 13 models I believe, don't retain the set volume between calls, but otherwise work OK.

 

[JimHilton]

Awsome! Thanks for the tip!