Tbrandes
Technical User
- Aug 8, 2003
- 61
Hello
I have two onging problems that maybe some else has experienced.
I am running a SCCS rls 3.0 using a 700t server with an option 61c Rls 25.30
First ?
Every hour I receive the following event code 41051 in my Alarm monitor
(Failed to commit bulk copy. rc=41051 sql_rc=41426)
note::This seems to have started a few months ago after the Sysbase SQL Server was stopped and started.The SQL server is running, the Monitor server is running, but the Backup server doesn't want to stay running. I am able to go into the SCCS and start the Backup SQL server but after a whilke it will stop it self. I am not sure if it is related to the event 41051 code but it seems to have happened about the same time.
,,,any suggestions would be helpful,,,
Second ?
I am also receiving about 5+ times a day Event Code 488848 in the Alarm monitor
(Service Request Failure. Error code: 0. . File/Line/Func: \vsm_vob\nivsm\src\VsmRsp.cpp\1783\TSMGiveIVRRSP::Execute, no service request. Service id: [72661].)
note::When this occurs I am able to do a call by call and locate the time stamp and the IVR being reported is not giving me a TN location of the voice port. Is this happening because the port is dropping the caller, or are the agents getting the call then going not ready and bouncing the call back to the IVR or is this normal and a bad event code needing a patch???
,,,open to any suggestions,,,
Thanks in advance
Tedd
I have two onging problems that maybe some else has experienced.
I am running a SCCS rls 3.0 using a 700t server with an option 61c Rls 25.30
First ?
Every hour I receive the following event code 41051 in my Alarm monitor
(Failed to commit bulk copy. rc=41051 sql_rc=41426)
note::This seems to have started a few months ago after the Sysbase SQL Server was stopped and started.The SQL server is running, the Monitor server is running, but the Backup server doesn't want to stay running. I am able to go into the SCCS and start the Backup SQL server but after a whilke it will stop it self. I am not sure if it is related to the event 41051 code but it seems to have happened about the same time.
,,,any suggestions would be helpful,,,
Second ?
I am also receiving about 5+ times a day Event Code 488848 in the Alarm monitor
(Service Request Failure. Error code: 0. . File/Line/Func: \vsm_vob\nivsm\src\VsmRsp.cpp\1783\TSMGiveIVRRSP::Execute, no service request. Service id: [72661].)
note::When this occurs I am able to do a call by call and locate the time stamp and the IVR being reported is not giving me a TN location of the voice port. Is this happening because the port is dropping the caller, or are the agents getting the call then going not ready and bouncing the call back to the IVR or is this normal and a bad event code needing a patch???
,,,open to any suggestions,,,
Thanks in advance
Tedd