Recent content by wbaith

Routes are built in LD 16 and Trunks are built in LD 14. You need to build the Routes before you build the Trunks.

Routs are built in LD 16 but here is a web page that may help you out a bit... http://home.wi.rr.com/browser/ghtrout/files/bars101.html

After you build the first set, you can enter... REQ: LUVU TYPE: 3000 TN <RETURN> You will get a list of all the unused digital TN's including the fifteen left on the new card.

I have mostly Opt 11's. Why would you not use it on an 11?

I have some co-workers that are telling me that they were told in a GlobalKnowlege class to NEVER use the "MOV" command to move a phone from one TN to another. I asked why and they said because the database will become corrupt. Has anyone here had any problems with the "MOV" command. It sure...

Here is some good info... http://www1.avaya.com/enterprise/applicationnotes/ipmeridian11cp.pdf

I am installing a new Opt 11 with Succession 3.0 and just got the PRI DID's working. When I call into the PBX on one of the DID's the ringing is set to some kind of Europe type of ring. It is a real short ring with a short pause and just keeps repeating. Does anyone know how to change this?

Arch, Thanks for your help. I provided the list you gave me to our vendor. This week, YOU 'Da man!!!

johnpoole, this is why I have deny codes after 911: To stop misdials to 911/9911 using SPN, FLEN and SDRR. In the following example, callers dialing 9911 will route to the 911 center. However, if they dial 9911 + any additional digits) the call will be blocked. There is a slight delay before...

ArchibaldJCox, Did you ever find those other patches?

If it has CallPilot, you need to do a shutdown.

ArchibaldJCox, thank you so very much. You people don't know how much of a help you've been to me. This is my 4th OPT 11 install and I think there has been around 2 years between each install. Every time I install a PBX it feels like the first time. I work on so many other systems (analog...

Thanks, ArchibaldJCox! I'll contact our vendor. MERIDIAN11C, this is a brand new Opt 11 with Succession 3.0. I don't even have any sets built yet. I thought maybe I forgot to build something in LD 15 or 17??? If it's just a problem with needing a patch, no big deal. Here's a question...

I am adding DENY entries to an SPN and I keep getting BUG0841 codes when I hit return after entering the DENY entry. Here is the description of BUG0841: BUG0841 Block size parameter is not correct. Procedure File MEMXXX. Output: PAGE#, BLKSIZE. Severity: Minor Here is the text capture from...

Here is how to set it up: In this case, the PBX is in a 10-digit dialing area. The range for DIDs are (123)456-5500 through (123)456-5599. Any time someone dials a DID number via 9-123-456-55XX, DMI 1 will strip off 123-456 and send the call directly to the extension. >LD 90 NPA 123 RLI 0...