Paging with dial and dial paging together

[xjestr]

Running IP Office with Volcom PageProIP paging amp.
I have a Group set up for the Volcom overhead speakers that works fine.
I have a short code set up for Dial Paging for all of our desk phones that also work fine.
Is there anyway to combine a normal extension dial AND dial paging in one button so that overhead speakers and Avaya phones page together?

 

[John Tel]

You can use a Valcom VMT-2 of an analog port set as a page speaker and add that extension to your dial paging group. The output of your PagePro is likely analog where the output of your VMT-2 will replace. With an VIP-801a you can take that analog audio feed in and multicast back to any Valcom IP speakers or IP endpoints.

I haven’t had a chance to test yet but you may be able to take the PagePro multicast output and feed your phones if they are IP phones for the page to come through.

 

[snowman50]

Why don’t you add the user of the valcom page group to your Dial Paging Group .
That way when you Use Dial Paging button both should page..

 

[TouchToneTommy]

The Page Pro IP is a SIP extension, add it to the page group with the telephones, and on the Extension settings for the PagePro, on the VoIP tab, change the drop-down for 3rd Party Auto Answer to Answer After